markers light Tunnel plastic led wired road stud
|Payment Type:||T/T,D/P,Paypal,Money Gram,Western Union|
|Terms of Trade:||FOB,CIF,EXW|
|Delivery Time:||7 Days|
|Place of Origin:||guangdong|
Model No.: WDM-RC24-2-RY
1. Detailed parameters of markers light Tunnel plastic led wired road stud:
1. Product model: WDM-DD07-PC
2. Product size: 100*105*19MM
3. Lamp bead color: yellow and white
4. Number of lamp Beads: 12
6. Yellow wavelength: 590-595NM
9. White brightness: 18900-22600MCD
10. Protection grade: IP68
11. Shell material: plastic
12. Working voltage: DC12V/24V
13. Rated power: 0.5W
14. Working temperature: -40℃~60℃
15. Working mode: Chang Liang
The tunnel active stud is a kind of road stud. It is set along both sides of the road and is used to indicate the road and the edge of the tunnel at night or in rain and fog. It consists of a housing, LEDs, wires, and control devices. It can use solar panels It can be powered by alternating current. It can rely solely on active lighting and can be combined with passive reflective visual induction facilities. The working mode is always on or flashing. The active road studs used in tunnels have oil resistance requirements and require a large number of LEDs. The housing can be a plastic housing. The active road stud shell used for pavement has pressure resistance requirements, and it is mostly a cast aluminum shell, which combines active light emission with reflective light.
1. Plastic active road studs are a type of road studs that are set along both sides of the tunnel and are used to indicate road and tunnel edges at night or in rain and fog.
2. The plastic active road studs use ultra-bright Taiwan wafer chip lamp beads. The color is eye-catching and the color is clear. It has good visual performance, which can attract the attention of the driver, reduce the speed, and improve the driving safety on the road.
3. There are many colors for plastic active spikes, and the color of the lamp beads can be customized according to customer requirements.
4. Plastic active road studs have good waterproof and dustproof effects, and the protection grade can reach IP68.
(1) The tunnel active studs are generally installed on the side wall of the tunnel cable trench. The installation position is first determined with a ruler. The height is designed according to the drawing to ensure that the longitudinal direction is on a straight line, and the horizontal and horizontal alignment is at the same time. Position holes on both sides of the active spike, drill holes, and plunge the rubber plug into the drilled holes. The middle of the two holes is drilled through the wall hole? 8 or? 10 according to the diameter of the active spike.
(2) The ratio of Glue is 1: 0.7 for glue A and glue B, then add 15%-30% of cement as filler (the glue is not easy to stir too much at one time, enough for one person to stick 50-70 spikes) glue). The colloid should be stirred evenly (the hand drill is equipped with a stirrer) and the color is consistent. Each active spike requires about 30-40 grams of glue.
(3) The surface of the installation location should be cleaned. Use a batch knife of about 30-40 grams of glue and apply it to the back of the spike. Put the active spike wire through the side wall of the cable trench (pre-punched holes) and place it At the location, install self-tapping and tighten with a Phillips screwdriver on both sides.
(4) After installing the road studs, scrape the glue around the road studs with a batch knife to clean them up.
(5) After the installation of the road studs, after receiving the pre-arranged main line, connect the control box and test whether there is a short circuit with a universal meter. If there is no problem, you can connect the main power.
Do not touch the vicinity of the lamp with your hands. Avoid glue sticking to the housing and affecting the luminous effect! It is forbidden to install active spikes with water, moisture and oil stains (easy to fall off). 4 hours after installation, evacuate the road cone.
Field application pictures of markers light Tunnel plastic led wired road stud:
Shenzhen Wide Way Optoelectronics Co., Ltd.
ShenZhen Wide Way Optoelectronics Co.,Ltd is a professional manufacturer of LED traffic products .We are specilized in LED traffic signal lights ,arrow traffic lights ,solar road stud ,traffic countdown timer,ETC ,LED pixels cluster ,traffic guide lights .etcOur company culture is keep on science and technology innovation and we have our own research team to develop new intelligent traffic product with purpose "Keep the road more safety.Our competitive is professional and comprehensive, and we have our own factory ,so we can offer factory-direct price,strict QC before products shipping out .We also provide good after serive ,if any questions about the products or others you can contact us freely , we will give you feedback in 24 hours.
- Company Name: Shenzhen Wide Way Optoelectronics Co., Ltd.
- Representative: LiSheng
- Product/Service: traffic light , traffic light module , led arrow board , outdoor led display , highway led traffic product , led speed limit sign
- Capital (Million US $): 5000000
- Year Established: 2011
- Total Annual Sales Volume (Million US $): Below US$1 Million
- Export Percentage: 51% - 60%
- Total Annual Purchase Volume (Million US $): Below US$1 Million
- No. of Production Lines: 6
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: 5 -10 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 5,000-10,000 square meters
- Factory Location: No. 2 Shenglian Road, Wulian Village, Fenggang Town, Dongguan City
- Contact Person: Ms. FionaHuang
- Tel: 86--13652406263
Premium Related Products